<u id="rhzqh"><pre id="rhzqh"><source id="rhzqh"></source></pre></u>

  • <span id="rhzqh"></span>
  • <dfn id="rhzqh"><i id="rhzqh"></i></dfn>
    歡迎來到北京龍天韜略科技有限公司網站!
    網站導航
    產品中心
    當前位置:主頁 > 產品中心 > > 德國耶拿Analytik Jena耗材專區 > 702-A65.050耶拿Analytik Jena*氫化物石英管

    耶拿Analytik Jena*氫化物石英管

    簡要描述:北京龍天韜略科技有限公司代理德國耶拿Analytik Jena*耗材配件,空心陰極燈/石墨管/霧化器/樣品杯/進樣針/進樣器/注射器/TOC燃燒管/石英棉/催化劑等耗材配件,常用耗材配件現貨供應,訂貨貨期短,到貨快,原裝正品,質量保證。誠招全國代理商和銷售耶拿Analytik Jena*氫化物石英管

    • 產品型號:702-A65.050
    • 產       地:北京市
    • 更新時間:2022-03-22
    • 訪  問  量:1757
    詳細介紹

    北京龍天韜略科技有限公司代理德國耶拿Analytik Jena*耗材配件,空心陰極燈/石墨管/霧化器/樣品杯/進樣針/進樣器/注射器/TOC燃燒管/石英棉/催化劑等耗材配件,常用耗材配件現貨供應,訂貨貨期短,到貨快,原裝正品,質量保證。誠招全國代理商和銷售耶拿Analytik Jena*氫化物石英管

    Consumables
    multi N/C series
    effective from 01.01.2010
      Priority Order number Description
    CONSUMABLES TOC
    ( all types of instruments )
    A   402-810.047   Special catalyst multi N/C, one filling, 40 g
    recommended for multi N/C 3000/3100
    A   402-810.048   Special catalyst platinum, one refill
    multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S
    A 402-810.050   Halogen absorber filling (copper- and brass wool)
    Consumables multi N/C series
    Analytik Jena AG, 15.12.2009 2 / 22 effective from 01.01.2010
    B 402-810.058 Special catalyst multi N/C, 200 g
    recommended for multi N/C 3000/3100
    B 402-810.059 Special catalyst platinum, sufficient for 5 refills
    multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S
    A 402-825.044 Quartz wool, 1 packet
    A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber
    ( without connections )
     
    A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g
    A 402-881.228 Disposable retention filter (water trap) A 402-881.229 TC prefilter (aerosol trap)
      402-881.245 Set of TC prefilter and water trap
    A 402-885.017 High-temperature mat, set of 3 pieces
      B 402-885.019 Halogen absorber, complete with U-tube
    multi N/C 2100 and multi N/C 2100 S multi N/C 2100 WEARING MATERIAL
    B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces
    A 402-520.137 Glass screw joint (gray)
    A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)
    A 402-815.102 O-rings for combustion tube, set of 3 pieces
    B 402-815.138 Dosing syringe for phosphoric acid, 5 ml
      402-815.819 O-ring; 15.5 mm x 2.5 mm; Viton IC-vessel N/C 2100 S ( Stopper )
    A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
    A 402-825.041 Fork-type clamp KS 13/2 with clamping screw
    A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK
    A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK
    A 402-881.238 Septa for pneumatic heads, 10 mm o.d., set of 10 pieces
    multi N/C 2100: only for N/C 2100 S
    A 402-884.005 Pump hose for peristaltic pump, waste
    A 402-885.010 Combustion tube
    A 402-885.011 Pump hose for H3PO4 pump
    B 402-886.303 Syringe 100 μl with vent and removable needle 0.63 mm x
    0.35  mm (only for APG  60)
    B 402-886.304 Syringe 250 μl with vent and removable needle 1 mm x 0.7 mm (only for APG 60)
    A 402-886.305 Syringe 500 μl with vent and removable needle 1 mm x 0.7
    mm (only for APG 60)?
    A 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces
    multi N/C 2100: only for multi N/C 2100 S
    A 402-886.310 Septum for syringe (autosampler); 9.5 mm o.d.; 1 piece
    B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection
    A 402-886.314 Septa pre-cut for septum-head, 11 mm, 3 pieces
    A 402-886.317 Condensing loop multi N/C 2000/2100/2100 S
    B 402-886.318 Sample vials, 8 ml
    50  mm x 18 mm, 125 pieces multi N/C 2100: for APG 60-sampler multi N/C 2100 S: for APG 60-sampler
    A 402-889.050 Septum; 12.5 mm; set of 5 pieces
    multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul
    B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces
    B 402-889.092 Sample vials, 2 ml, set of 100 pieces
    ( for sample rack with 112 positions )
      402-890.100 IC condensing vessel multi N/C 2100
    A 402-890.110 tubing kit for multi N/C 2100 S
    A 402-890.111 tubing kit for multi N/C 2100
    B 402-890.113 needle with luer connector for H3PO4-syringe     402-890.150 IC condensing vessel multi N/C 2100 S
    WEARING MATERIAL Double Furnace Solids Module
      402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
    A 402-890.103 Furnace sealing plug
    A 402-890.104 Solid combustion tube
    A 402-890.105 Hook
    A 402-890.106 Guidance tube
     
    402-890.107 Gasket for oxygen lock
    A 402-890.108 Gas transfer tubing, adapter with ball joint
    A 402-890.109 O2  tubing
    multi N/C 3100 multi N/C 3100 WEARING MATERIAL
    B 402-000.005 Sample vials, 80 mm x 33 mm, 70 pieces
    multi N/C 3100: for dilution rack APG 64
    B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces
    A 402-520.135 Fork-type clamp for oxygen supply
    A 402-520.137 Glass screw joint (gray)
    A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)
    A 402-815.102 O-rings for combustion tube, set of 3 pieces
    B 402-815.204 Septum silicon/PTFE, 24 mm, for screw cap EPA, set of
    100  pieces
    B 402-815.205 Screw cap for 40 ml EPA screw thread vial, set of 100 pieces
    B 402-820.075 Bottle Insert
    402-825.041 Fork-type clamp KS 13/2 with clamping screw
    B 402-825.099 Sample vials for dilution rack, 100 mm x 16 mm, 10 pieces
    B 402-825.119 Sample vessels for EPA Sampler with piercing function, set of 100 pieces
    40  ml EPA screw thread vial
    A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK
    A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK
    B 402-883.005 Sample aspiration
    multi N/C 3100: also purge tube
    A 402-884.005 Pump hose for peristaltic pump, waste
    A 402-884.019 Injection tube
    B 402-884.021 Waste hose with screw joint (2 m)
    B 402-884.023 Lid for Bottle Insert
    402-885.002 Condensation coil
    A 402-885.010 Combustion tube
    A 402-885.011 Pump hose for H3PO4 pump
    A 402-885.016 Sample aspiration tube with screw joint
    multi N/C 3100: also purge tube
    B 402-886.319 Sample vials for APG 64-sampler, 78 mm x 28 mm, 100 pieces
    A 402-889.050 Septum; 12.5 mm; set of 5 pieces
    multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul
     402-890.163 Piercing sample aspiration tube for EPA sampler, titanium
      402-890.164 Piercing sample purge tube for EPA sampler, titanium
      402-890.193 Tubing kit for multi N/C 3100
      402-890.200 Condensation vessel
    HT 1300
    HT 1300 WEARING MATERIAL
      402-815.830 Gasket for dust trap for HT furnace (34 mm x 4 mm)
    A 402-825.044 Quartz wool, 1 packet
    A 402-881.013 U-tube, o.d. = 21 mm for halogen absorber
    A 402-881.203 Glass tube, straight, without connectors
    A 402-881.213 Headline-Disposable-In-Line-Filter, box of 10 pieces
    B 402-886.001 Ceran field for HT furnace
    B 402-886.003 Connecting hose "Analyt" for HT furnace, 4 mm x 6 mm, 1 m long
    B 402-886.004 Connecting hose "pump" for HT furnace, 4 mm x 6 mm, 1 m long
    A 402-886.005 Connecting hose "oxygen supply" for HT furnace, 4 mm x
    6  mm, 2 m long
     
    B 402-886.006 Feeding tool for HT furnace
    A 402-886.014 Ceramic combustion tube
    B 402-886.114 Halogen absorber filling for straight tube A 402-886.116 Drying agent
    A 402-886.118 Porcelain boat (white); 1,000 pieces
    A 402-886.312 Halogen absorber filling for U-tube, o.d. = 21 mm
    ( conditioned )
      402-886.322 Halogen absorber filling (conditioned)
    for U-tube, o.d. = 21 mm, set of 5 pieces
    Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.
    Specifications and order numbers are subject to changes due to further technical development.
    Prices are quoted exclusive of value added tax.
    Purchase is subject to the General Terms and Conditions of Analytik Jena AG.

    Polystyrene-sample cup 1,5 ml; 1,000 pieces

    407-218.852

    Pack of 10 pieces PTFE- sample cup, 2 ml

    407-230.075

    Pack of 10 pieces PP-sample cup, 5 ml

    407-230.073

    Pack of 10 pieces PTFE-special cup, 5 ml

    407-230.072

    Pack of 100 pieces Sarstedt PP- sample cups with 15 ml

    407-400.057

    Pack of 50 pieces Sarstedt PP- sample cups with 30 ml

    407-400.054

    Pack of 30 pieces Sarstedt PP- sample cups with 50 ml

    407-402.926

     

     

     

     

     

    德國耶拿EA3100硫氮氯元素分析儀備件蒸發管402-889.115和燃燒管402-889.114

    402-889.050        Septum 12.5mm  進樣墊(每袋5個) 

    402-889.137        sample        filter 

    UVF/CLD  檢測器過濾膜(每袋20個) 

    402-889.143        Xenon  lamp       氙燈 

    402-823.048        Membrane dryer  膜式干燥器 

    402-890.012        Type  III 

    combustion tube  燃燒管 

    402-881.244        particles 

    filter, set of 5       顆粒物過濾片 

    Description Order No.

    furnace module (CFM)

            

    fitting, 1/8" bulkhead, nylon NY-200-61 702-30001

            

    fitting, 1/8" bulkhead, retainer, SS-202-61f       702-30019

            

    fitting, 1/8" bulkhead, brass   702-30020

            

    fitting, 1/4" x 1/8" TfE r.union, T-400-6-2        702-30031

            

    tube connector M5 hose 3,5x0,75   702-520.100

            

    tube connector M5 f. hose 6x1        702-520.110

            

    screw-fitting M5xM5 IG angled     702-520.121

            

    needle valve (preadjustment purge)          702-520.130

            

    ferrule 1/4" for article number 702-30031         702-30002

            

    screw-fitting M5x2x M5 IG angled         702-520.132

            

    ferrule 1/8" for article number 702-30031         702-30003

            

    fitting, 1/8"Tube x 1/4" tube, nylon, NY.200-R-4      702-520.160

            

    fitting, 3/8"x1/8" nylon r.union, NY-600-6-2    702-520.163

            

    bola-transition-fittings (3,2/6)         702-520.184

            

    heating unit 24V/15W (for valve NS/Cl)  702-800.619

            

    mainboard for multi EA?3100         702-805.254

            

    serial cable 702-808.359

            

    power supply PSU60-24       702-808.375

            

    mains filter fKID2-50-6/I       702-808.379

            

    power supply NDIR +24V PCMAS40S24      702-808.461

            

    toroid transformer 80VA 2x12V(for converter)         702-808.531

            

    needle valve 1/8" SWAGELOK B-SS2(purge / H2SO4)    702-820.060

            

    pressure regulator         702-820.073

            

    2/3 ways valve (V0/V1/V17) 702-820.084

            

    1/8" tefzel tee P-633     702-820.102

            

    3/2-valve NS/Clwithout gas connectors   702-820.142

            

    valve block peek with connectors complete       702-889.149

            

    membrane dryer 48"     702-823.048

            

    mass flow controller 24 V     702-823.055

            

    fan  80 x 80, 24 V       702-827.039

            

    fan 40 x 40, 24 V         702-827.040

            

    4-port RS-232 module  702-011.050

            

    PCB IDC VTI - O BG 702-835.024

            

    PCB IDC AD IO-2      702-835.025

            

    micro controller unit compl.   702-889.191

            

    micro controller unit compl. regenerated   702-889.191R

            

    pressure switch type 300 preadjusted       702-881.025

            

    KS13- ball, angled        702-889.121

            

    COM Interface    702-889.189

            

    hose connection UVF   702-889.183

            

    adapter 1/4" to  M5      702-520.189

            

    sheet nut PP black        702-815.823

            

    MFC adapter  M5        7126.97003000101

            

    furnace  multi EA 3100 complete 115V  702-889.176

            

    furnace  multi EA 3100 complete 230V  702-889.083

            

    electronic rear base plate        702-889.187

            

    flange for combustion tube    702-889.188

            

    switching valve   702-889.190

            

    screw reductor G1/8" auf M5         702-520.138

            

    thermocouple PtRh87/13%-Pt, Typ R      702-800.916

            

    connector for 1/4"UNF-28 Peek for 1/8" -tube, P-703        702-820.103

            

    T-piece       702-820.141

            

    fan protector for 40mm 702-827.036

            

    O-ring 16x3        702-881.107

            

    correction line for thermocouple      702-808.521

            

    Upgrade kit combustion tube 3       702-890.014

            

    MFM complete with cable and plug         7889.

            

    heating unit(converter)  889.089 01000011

            

    converter module 702-889.089 

            

            

            

            

    detector module (DTM)        

            

    mains filter fKID2-50-6/I       702-808.379

            

    power supply (DTM)   702-808.462

            

    pre amplifier  f.multi EA 3100       702-99998

            

    measuring amplifier pcb         702-890.001

            

    IDC-chlorinemeter typ 2 with power supply 230V AC       702-890.002

            

    IDC-chlorinemeter typ 2 with power supply 115V AC       702-890.000

            

    humidifier box     702-889.181

            

    meas. cell body    702-889.185

            

    front window      702-815.824

            

    cove meas. Cell   702-007.006

            

    chemo detector TS        702-889.014

            

    chemo detector TN       702-889.013

            

    magnetic stirrer TM96  702-75102

            

            

    GSS-module      

            

    3/2 direction control seesaw valve typ 6606      702-820.097

            

    micro metering valve assy 1/8 (flangeless fitting)       702-820.143

            

    micro-pump 24 V         702-820.144

            

            

    MVS

            

    flame sensor for boat drive multi EA 3100        702-890.004

            

            

    UVFD      

            

    data cable horiba  702-889.090

            

    Y-adapter for 6mm tube         702-820.140

            

    catalyst cylinder   702-889.138

            

    Air filter     702-889.139

            

    Air filter     702-889.140

            

    diaphragm assembly for pump        702-889.141

            

    pump unit   702-889.142

            

    Xenon lamp         702-889.143

            

    HC cutter   702-889.144

            

    scrubber     702-889.145

            

    O-ring for sample gas filter    702-889.146

            

    sample gas filter set (25pcs.) special material     702-889.154

            

    diaphragm for pump/valve     702-889.155

            

            

    CLD   APNA-360     

            

            

            

    ppd-capillary(CLD)      702-889.160耶拿Analytik Jena*氫化物石英管

     

     


    產品咨詢

    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7
    推薦產品

    如果您有任何問題,請跟我們聯系!

    聯系我們

    版權所有©2022 北京龍天韜略科技有限公司 備案號:京ICP備11018352號-1 sitemap.xml 技術支持:化工儀器網 管理登陸

    北京龍天韜略科技有限公司(www.mmofury.com)主營:石墨管,石墨錐,空心陰極燈,元素燈,熒光燈,氘燈,鎢燈,矩管,中心管,霧化器,泵管,采樣錐,截取錐,樣品杯,標準溶液,原子吸收,原子熒光,光譜儀,質譜儀

    地址:北京市西城區西安門大街光明胡同23號院

    在線咨詢 聯系方式 二維碼

    服務熱線

    010-66039918

    掃一掃,關注我們

    视频一区国产,视频一区国产高清91,视频一区另类,视频一区欧美,视频一区视频视频二区
    掃一掃訪問手機站掃一掃訪問手機站
    訪問手機站