<u id="rhzqh"><pre id="rhzqh"><source id="rhzqh"></source></pre></u>

  • <span id="rhzqh"></span>
  • <dfn id="rhzqh"><i id="rhzqh"></i></dfn>
    歡迎來到北京龍天韜略科技有限公司網站!
    網站導航
    產品中心
    當前位置:主頁 > 產品中心 > > 德國耶拿Analytik Jena耗材專區 > 402-886.118德國耶拿Analytik Jena*瓷船 陶瓷

    德國耶拿Analytik Jena*瓷船 陶瓷

    簡要描述:402-886.118 Porcelain boat (white); 1,000 pieces
    代理德國耶拿Analytik Jena*耗材配件,空心陰極燈/石墨管/霧化器/樣品杯/進樣針/進樣器/注射器/TOC燃燒管/石英棉/催化劑等耗材配件,常用耗材配件現貨供應,訂貨貨期短,到貨快,原裝正品,質量保證。德國耶拿Analytik Jena*瓷船 陶瓷

    • 產品型號:402-886.118
    • 產       地:北京市
    • 更新時間:2022-03-22
    • 訪  問  量:1050
    詳細介紹

    代理德國耶拿Analytik Jena*耗材配件,空心陰極燈/石墨管/霧化器/樣品杯/進樣針/進樣器/注射器/TOC燃燒管/石英棉/催化劑等耗材配件,常用耗材配件現貨供應,訂貨貨期短,到貨快,原裝正品,質量保證。德國耶拿Analytik Jena*瓷船 陶瓷

    Consumables
    multi N/C series
    effective from 01.01.2010
      Priority Order number Description
    CONSUMABLES TOC
    ( all types of instruments )
    A   402-810.047   Special catalyst multi N/C, one filling, 40 g
    recommended for multi N/C 3000/3100
    A   402-810.048   Special catalyst platinum, one refill
    multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S
    A 402-810.050   Halogen absorber filling (copper- and brass wool)
    Consumables multi N/C series
    Analytik Jena AG, 15.12.2009 2 / 22 effective from 01.01.2010
    B 402-810.058 Special catalyst multi N/C, 200 g
    recommended for multi N/C 3000/3100
    B 402-810.059 Special catalyst platinum, sufficient for 5 refills
    multi N/C 2100: recommended for multi N/C 2000/2100/2100 S multi N/C 2100 S: recommended for multi N/C 2000/2100/2100 S
    A 402-825.044 Quartz wool, 1 packet
    A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber
    ( without connections )
     
    A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g
    A 402-881.228 Disposable retention filter (water trap) A 402-881.229 TC prefilter (aerosol trap)
      402-881.245 Set of TC prefilter and water trap
    A 402-885.017 High-temperature mat, set of 3 pieces
      B 402-885.019 Halogen absorber, complete with U-tube
    multi N/C 2100 and multi N/C 2100 S multi N/C 2100 WEARING MATERIAL
    B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces
    A 402-520.137 Glass screw joint (gray)
    A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)
    A 402-815.102 O-rings for combustion tube, set of 3 pieces
    B 402-815.138 Dosing syringe for phosphoric acid, 5 ml
      402-815.819 O-ring; 15.5 mm x 2.5 mm; Viton IC-vessel N/C 2100 S ( Stopper )
    A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
    A 402-825.041 Fork-type clamp KS 13/2 with clamping screw
    A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK
    A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK
    A 402-881.238 Septa for pneumatic heads, 10 mm o.d., set of 10 pieces
    multi N/C 2100: only for N/C 2100 S
    A 402-884.005 Pump hose for peristaltic pump, waste
    A 402-885.010 Combustion tube
    A 402-885.011 Pump hose for H3PO4 pump
    B 402-886.303 Syringe 100 μl with vent and removable needle 0.63 mm x
    0.35  mm (only for APG  60)
    B 402-886.304 Syringe 250 μl with vent and removable needle 1 mm x 0.7 mm (only for APG 60)
    A 402-886.305 Syringe 500 μl with vent and removable needle 1 mm x 0.7
    mm (only for APG 60)?
    A 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces
    multi N/C 2100: only for multi N/C 2100 S
    A 402-886.310 Septum for syringe (autosampler); 9.5 mm o.d.; 1 piece
    B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection
    A 402-886.314 Septa pre-cut for septum-head, 11 mm, 3 pieces
    A 402-886.317 Condensing loop multi N/C 2000/2100/2100 S
    B 402-886.318 Sample vials, 8 ml
    50  mm x 18 mm, 125 pieces multi N/C 2100: for APG 60-sampler multi N/C 2100 S: for APG 60-sampler
    A 402-889.050 Septum; 12.5 mm; set of 5 pieces
    multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul
    B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces
    B 402-889.092 Sample vials, 2 ml, set of 100 pieces
    ( for sample rack with 112 positions )
      402-890.100 IC condensing vessel multi N/C 2100
    A 402-890.110 tubing kit for multi N/C 2100 S
    A 402-890.111 tubing kit for multi N/C 2100
    B 402-890.113 needle with luer connector for H3PO4-syringe     402-890.150 IC condensing vessel multi N/C 2100 S
    WEARING MATERIAL Double Furnace Solids Module
      402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces
    A 402-890.103 Furnace sealing plug
    A 402-890.104 Solid combustion tube
    A 402-890.105 Hook
    A 402-890.106 Guidance tube
     
    402-890.107 Gasket for oxygen lock
    A 402-890.108 Gas transfer tubing, adapter with ball joint
    A 402-890.109 O2  tubing
    multi N/C 3100 multi N/C 3100 WEARING MATERIAL
    B 402-000.005 Sample vials, 80 mm x 33 mm, 70 pieces
    multi N/C 3100: for dilution rack APG 64
    B 402-000.008 Stirring magnets, 15 mm x 6 mm, 10 pieces
    A 402-520.135 Fork-type clamp for oxygen supply
    A 402-520.137 Glass screw joint (gray)
    A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)
    A 402-815.102 O-rings for combustion tube, set of 3 pieces
    B 402-815.204 Septum silicon/PTFE, 24 mm, for screw cap EPA, set of
    100  pieces
    B 402-815.205 Screw cap for 40 ml EPA screw thread vial, set of 100 pieces
    B 402-820.075 Bottle Insert
    402-825.041 Fork-type clamp KS 13/2 with clamping screw
    B 402-825.099 Sample vials for dilution rack, 100 mm x 16 mm, 10 pieces
    B 402-825.119 Sample vessels for EPA Sampler with piercing function, set of 100 pieces
    40  ml EPA screw thread vial
    A 402-881.026 Finger-Tight-Set 1/8" for tube set, PEEK
    A 402-881.027 Finger-Tight-Set 1/16" for tube set, PEEK
    B 402-883.005 Sample aspiration
    multi N/C 3100: also purge tube
    A 402-884.005 Pump hose for peristaltic pump, waste
    A 402-884.019 Injection tube
    B 402-884.021 Waste hose with screw joint (2 m)
    B 402-884.023 Lid for Bottle Insert
    402-885.002 Condensation coil
    A 402-885.010 Combustion tube
    A 402-885.011 Pump hose for H3PO4 pump
    A 402-885.016 Sample aspiration tube with screw joint
    multi N/C 3100: also purge tube
    B 402-886.319 Sample vials for APG 64-sampler, 78 mm x 28 mm, 100 pieces
    A 402-889.050 Septum; 12.5 mm; set of 5 pieces
    multi N/C 2100: for manual TIC - Port multi N/C 3100: for POC Modul
     402-890.163 Piercing sample aspiration tube for EPA sampler, titanium
      402-890.164 Piercing sample purge tube for EPA sampler, titanium
      402-890.193 Tubing kit for multi N/C 3100
      402-890.200 Condensation vessel
    HT 1300
    HT 1300 WEARING MATERIAL
      402-815.830 Gasket for dust trap for HT furnace (34 mm x 4 mm)
    A 402-825.044 Quartz wool, 1 packet
    A 402-881.013 U-tube, o.d. = 21 mm for halogen absorber
    A 402-881.203 Glass tube, straight, without connectors
    A 402-881.213 Headline-Disposable-In-Line-Filter, box of 10 pieces
    B 402-886.001 Ceran field for HT furnace
    B 402-886.003 Connecting hose "Analyt" for HT furnace, 4 mm x 6 mm, 1 m long
    B 402-886.004 Connecting hose "pump" for HT furnace, 4 mm x 6 mm, 1 m long
    A 402-886.005 Connecting hose "oxygen supply" for HT furnace, 4 mm x
    6  mm, 2 m long
     
    B 402-886.006 Feeding tool for HT furnace
    A 402-886.014 Ceramic combustion tube
    B 402-886.114 Halogen absorber filling for straight tube A 402-886.116 Drying agent
    A 402-886.118 Porcelain boat (white); 1,000 pieces
    A 402-886.312 Halogen absorber filling for U-tube, o.d. = 21 mm
    ( conditioned )
      402-886.322 Halogen absorber filling (conditioned)
    for U-tube, o.d. = 21 mm, set of 5 pieces
    Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.
    Specifications and order numbers are subject to changes due to further technical development.
    Prices are quoted exclusive of value added tax.
    Purchase is subject to the General Terms and Conditions of Analytik Jena AG.

    Polystyrene-sample cup 1,5 ml; 1,000 pieces

    407-218.852

    Pack of 10 pieces PTFE- sample cup, 2 ml

    407-230.075

    Pack of 10 pieces PP-sample cup, 5 ml

    407-230.073

    Pack of 10 pieces PTFE-special cup, 5 ml

    407-230.072

    Pack of 100 pieces Sarstedt PP- sample cups with 15 ml

    407-400.057

    Pack of 50 pieces Sarstedt PP- sample cups with 30 ml

    407-400.054

    Pack of 30 pieces Sarstedt PP- sample cups with 50 ml

    407-402.926

    德國耶拿Analytik Jena*瓷船 陶瓷

     

     


    產品咨詢

    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7
    推薦產品

    如果您有任何問題,請跟我們聯系!

    聯系我們

    版權所有©2022 北京龍天韜略科技有限公司 備案號:京ICP備11018352號-1 sitemap.xml 技術支持:化工儀器網 管理登陸

    北京龍天韜略科技有限公司(www.mmofury.com)主營:石墨管,石墨錐,空心陰極燈,元素燈,熒光燈,氘燈,鎢燈,矩管,中心管,霧化器,泵管,采樣錐,截取錐,樣品杯,標準溶液,原子吸收,原子熒光,光譜儀,質譜儀

    地址:北京市西城區西安門大街光明胡同23號院

    在線咨詢 聯系方式 二維碼

    服務熱線

    010-66039918

    掃一掃,關注我們

    视频一区国产,视频一区国产高清91,视频一区另类,视频一区欧美,视频一区视频视频二区
    掃一掃訪問手機站掃一掃訪問手機站
    訪問手機站